home *** CD-ROM | disk | FTP | other *** search
- Boot procedures for TRSKER
- --------------------------
-
-
- A- The easy way.
-
- Get the TRSKER already on a TRSDOS (Model II) formatted diskette.
- (If you can't find it, send me an 8 inch diskette and I'll send
- it back to you with TRSKER.)
-
- B- The not so easy way.
-
- Get TRSKER.HEX on a PC.
- Connect the PC to the Model II using a direct link or a modem.
- Issue a SETCOM command to set communication speed on the Model II
- running TRSDOS.
- Issue a RECEIVE command on the Model II
- Issue a MODE command on the PC to set the communication speed.
- Issue a TYPE TRSKER.HEX > COM1: on the PC.
- Pray to your favorite metaphysical being for a good connection.
- Issue a DUMP command on the Model II to get your memory to disk.
-
- C- The hard but fullproof way.
-
- Get TRSKER source code on a PC.
- Setup communication speed on the Model II using SETCOM.
- Execute TERMINAL on the Model II.
- Open and reset RAM buffer.
- Enter terminal mode and watch the files go by.
- One after the other send the source files from the PC
- using TYPE TRSXXXX.MAC > COM1:
- After each file, on the Model II close the RAM buffer and
- write it to disk.
- Once your through with the transfer use the Microsoft assembler
- and linker for the Model II to produce an executable version.
-
- M80 TRSMAIN,=TRSMAIN
- M80 TRSDATA,=TRSDATA
- M80 TRSMSSG,=TRSMSSG
- M80 TRSRECV,=TRSRECV
- M80 TRSSEND,=TRSSEND
- M80 TRSUTIL,=TRSUTIL
- M80 TRSUTIL2,TRSUTIL2
-
- L80 TRSKER-N-E-M,TRSMAIN,TRSRECV,TRSSEND,TRSUTIL,TRSUTIL2,TRSMSSG,TRSDATA
-
-
- Happy Kermitting,
-
-
- Serge G. Kruk
- Systemes Temps Reel
- 1030 Hodge
- St-Laurent
- Quebec, Canada
-
- H4N 2B7 (514) 748-0515
-